https://coldframe.yardwork.top/index.htm ru Gardener2020 https://coldframe.yardwork.top/index_post_1661959994.htm <div id="anonce"> <div class="date">31 August 2022, 16:33</div> <div class="blog_body"> <h2><a href="https://coldframe.yardwork.top/index_post_1661959994.htm">Brick foundation for a greenhouse</a></h2> <div class="text"> <a href="https://coldframe.yardwork.top/index_post_1661959994.htm" ><img style="float:left;margin:0 15px 5px 0;" src="https://coldframe.yardwork.top/i/blog/main/s/1661441928.jpg" width="330" height="247" alt="Brick foundation for a greenhouse" ></a> The brick foundation for a polycarbonate greenhouse can be made on a concrete strip base or independent from brick alone. In any case, you will need to dig a trench around the perimeter of the greenhouse. The bottom of the trench is cleaned and leveled. We considered the device of a strip foundation made of concrete in a separate article. & nbsp; For a purely brick foundation, the trench will have a smaller depth - cm 20. We have to start with the question of possible limitations.</div> <div class="clear"></div> <div class="link"> <a href="https://coldframe.yardwork.top/index_post_1661959994.htm">Full article</a> <br>Category: <a href="https://coldframe.yardwork.top/index_index_main.htm">Greenhouses</a> </div> </div> </div> Wed, 31 Aug 2022 16:33:14 GMT https://coldframe.yardwork.top/index_post_1661786839.htm <div id="anonce"> <div class="date">29 August 2022, 16:27</div> <div class="blog_body"> <h2><a href="https://coldframe.yardwork.top/index_post_1661786839.htm">Do-it-yourself foundation for a greenhouse from a bar</a></h2> <div class="text"> <a href="https://coldframe.yardwork.top/index_post_1661786839.htm" ><img style="float:left;margin:0 15px 5px 0;" src="https://coldframe.yardwork.top/i/blog/main/s/1661441582.jpg" width="330" height="247" alt="Do-it-yourself foundation for a greenhouse from a bar" ></a> The construction of a foundation for a greenhouse from a bar begins with digging a shallow trench according to the size of the future greenhouse. First of all, the axes of the greenhouse frame are marked on the ground. For this, a cord and pegs are used, which are driven in at the intersection of the long and short sides of the greenhouse according to the size of each side. Further, stepping back from the axis by 10-20 cm in both directions, the pegs are hammered again, onto which a cord is pulled, limiting the size of the groove in width.</div> <div class="clear"></div> <div class="link"> <a href="https://coldframe.yardwork.top/index_post_1661786839.htm">Full article</a> <br>Category: <a href="https://coldframe.yardwork.top/index_index_main.htm">Greenhouses</a> </div> </div> </div> Mon, 29 Aug 2022 16:27:19 GMT https://coldframe.yardwork.top/index_post_1582579224.htm Mon, 24 Feb 2020 22:20:24 GMT